The addition of painting crown molding on the roof has changed the look of a room since the time of the ancient Greeks and Romans. The addition crown molding on the roof originally developed as a way to disguise the imperfections of walls and ceilings attached together. Moldings can add a decorative touch to any room. Moldings come in a variety of designs, styles and sizes to fit any decor. The color of the paint and the level of gloss, gloss or semi-gloss, chosen to paint a crown molding can have a significant impact on its finished appearance. A glossy paint finish is brighter, reflecting more light, than a semi-gloss finish.
Crown molding can be made of wood, imitation wood or foam. It is usually found in a natural or white wood color. Any material or color is your molding, it is moderately easy to painting crown molding ideas with a few steps. Decide on a color for the molding of the crown. For a classic look, consider white molded on a colored wall. You should also take into account the opening of your plant. If it can be seen in several rooms at once, it is better if the crown molding all matches. Buy a glossy or matt interior latex paint, depending on the look you are trying to achieve. You will also need a good, multipurpose primer.
Start with a clean surface free of dust and dirt. If the molding has old paint in poor condition, scrape as much as you can. Then lightly sand until you get a uniform surface. Clean the molding with a mild soap and water and let it dry completely. Fix any displaced molding before painting. Molding tends to pull the walls and ceilings with age, so you may have to repair points. Gaps or cracks between the wall and the molding should be filled with a paintable acrylic sealer. This will give you a more uniform appearance. Cut the old putty with a knife before applying the new sealant. Allow it to dry completely.
Prepare the walls and ceiling around the molding crown by applying a border of painter’s tape to protect them. A thin layer of paint. Use a small blade, inclined brush so it is easier to get a line even at corners and edges. If you are painting on a dark wood grain, you may need two coats of primer. Wait until the primer is completely dry. Lightly sand the molding to create a smooth finish. Wipe all the dust from the surface with a sticky rag and started in the paint. You should only take one coat of paint on top of the primer for a nice finish. Again, use an angular brush and go little by little. Once the paint is dry, remove the tape crown molding.