Grey wood stain – If you want your wooden floors to have a weathered and old look, you do not have to wait 50 years for this to happen naturally. There are two main ways to make your plants appear gray. This project will usually take at least one weekend, and possibly two, depending on the amount of work required on your floor. Remove all furniture in the room, and use plastic covers to seal doors and windows. Put adhesive tape on the cold air return vents or heating vents in the room. Sanding a floor is a dirty job, and your entire house may end up covered in dust. Of the soil sand. Borrow or rent an orbital floor sander to save time and surface. For top surface, use a heavy grade sandpaper for the first pass, a medium grade and a fine grade for the last.
This completely eliminates all the color and finish of the wood. It is also necessary to sand the edges with an edge sander since the floor sander cannot reach into the corners and sides of the room. Clean the dust with a vacuum cleaner and sweep away any dust in the environment. Dye the floor with a dark grey wood stain. Several commercial companies make two spots based on oil or gel based on a gray color. Apply one hand of this stain, either with a brush or a spot applicator. Let it dry. Next, sand the entire floor by hand with a fine grade sandpaper. Stain the floor again. Apply a third layer if necessary. Protect the soil. Even though your floors now resisted, you do not want to make them age prematurely. Apply a base polyurethane oil or water to the floor, and let it dry.
Sand between layer and layer. Use at least two layers to protect the floor. Use a fresh spot applicator pad to apply the poly layer. Prepare the room. Remove all furniture and tape off the floorboards. Go all over the floor with a medium grade sandpaper. Then, vacuum the dust. Of the paint on the floor surface with a soil primer. Once this is dry, sand lightly on the surface. Apply a diy grey wood stain epoxy floor paint on the floor, and cover it on the wood with at least one layer of epoxy floor paint. Use a roller or brush to paint the floor. Cut around the edges with the brush, and then unfold the larger areas in the room. Let it dry at least 12 hours before putting the furniture back in the room.